HP ENVY 15-as000 Maintenance and Service Guide - Page 34
Removal and replacement procedures, Bottom cover
View all HP ENVY 15-as000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5 Removal and replacement procedures CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. Component replacement procedures NOTE: Details about the computer, including product number, warranty information, model number, and serial number, are included on the service tag on the bottom of the computer. See Locating the product number, warranty information, model number, and serial number on page 14 for details. This chapter provides removal and replacement procedures. There are as many as 69 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Bottom cover Description Bottom cover (includes front rubber foot strip, shielding and vents) Spare part number 857800-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Remove the rear rubber foot strip (1). The rear rubber foot strip is included in the Rubber Kit, spare part number 858700-001. 26 Chapter 5 Removal and replacement procedures