HP ENVY 15-as000 Maintenance and Service Guide - Page 35

tool between the bottom cover, Release the bottom cover rear edge

Get HP ENVY 15-as000 PDF manuals and user guides View all HP ENVY 15-as000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

4. Remove the following screws that secure the bottom cover to the computer: (2) Two Torx5 M2.0×7.3 screws in the rear corners of the bottom cover (3) Four Phillips M2.5×7.8 screws under the rubber foot strip (4) Four Torx5 M2.0×5.4 screws on the front edge of the bottom cover 5. Insert a case utility tool (1) or similar plastic, flat-edged tool between the bottom cover and the computer near the display hinge areas. 6. Release the bottom cover rear edge (2) and swing it up and forward until it releases. Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
4.
Remove the following screws that secure the bottom cover to the computer:
(2)
Two Torx5 M2.0×7.3 screws in the rear corners of the bottom cover
(3)
Four Phillips M2.5×7.8 screws under the rubber foot strip
(4)
Four Torx5 M2.0×5.4 screws on the front edge of the bottom cover
5.
Insert a case utility tool
(1)
or similar plastic,
flat-edged
tool between the bottom cover
and the computer near the display hinge areas.
6.
Release the bottom cover rear edge
(2)
and swing it up and forward until it releases.
Component replacement procedures
27