HP ENVY 15-as000 Maintenance and Service Guide - Page 59
Release the display panel cable and the TouchScreen cable from the routing clips
View all HP ENVY 15-as000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the display assembly: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal. 2. Disconnect the TouchScreen board cable (2) from the system board. 3. Disconnect the webcam/microphone module cable (3) from the system board. 4. Release the ZIF connector (4) to which the display panel cable is connected, and then disconnect the display panel cable from the system board. 5. Release the display panel cable and the TouchScreen cable from the routing clips (5) and channel built into the right speaker. 6. Remove the eight Phillips M2.5×5.8 screws (1) that secure the display assembly to the keyboard/ top cover. Component replacement procedures 51