HP ENVY 15-u200 Maintenance and Service Guide - Page 44
Hard drive, Remove the hard drive
View all HP ENVY 15-u200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket and hard drive connector cable. These components are included in the Hard Drive Hardware Kit, spare part number 768020-001. Description 500-GB, 5400-rpm, 7.0-mm hard drive 500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm hard drive Hard Drive Hardware Kit (includes cable, bracket, and screws) Spare part number 778186-005 732000-005 768020-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 30). 5. Disconnect the battery. Remove the hard drive: 1. Disconnect the cable (1) from the system board. 2. Remove the two Phillips PM2.5×4.0 screws (2) that secure the hard drive to the computer. 36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts