HP ENVY 15-u200 Maintenance and Service Guide - Page 61
The memory module tilts up
View all HP ENVY 15-u200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5. Disconnect the battery. 6. Remove the WLAN module (see WLAN module on page 40). 7. Remove the system board (see System board on page 49). Remove the memory module: 1. Position the system board upside-down. 2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 3. Remove the memory module (2) by pulling the module away from the slot at an angle. Reverse this procedure to install a memory module. Component replacement procedures 53
5.
Disconnect the battery.
6.
Remove the WLAN module (see
WLAN module
on page
40
).
7.
Remove the system board (see
System board
on page
49
).
Remove the memory module:
1.
Position the system board upside-down.
2.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
3.
Remove the memory module
(2)
by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
Component replacement procedures
53