HP ENVY 17-1000 HP ENVY 17 - Maintenance and Service Guide - Page 63
Power button board, Remove the power button board
View all HP ENVY 17-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Power button board Description Power button board (includes cable) Spare part number 603794-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37), and then remove the following components: a. memory module compartment cover (see Memory module on page 42) b. Keyboard (see Keyboard on page 50) c. Top cover (see Top cover on page 52) Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the power button board to the top cover. 3. Remove the power button board (2). Reverse this procedure to install the power button board. ENWW Component replacement procedures 55