HP ENVY PC 13-ba1000 Maintenance and Service Guide - Page 48
Touchpad, that secure
View all HP ENVY PC 13-ba1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Touchpad NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is available using spare part number L87955-001. Touchpads that are included with keyboard/top covers with wood veneer cannot be replaced. Table 5-3 Touchpad description and part number Description Spare part number Touchpad in pale gold finish Touchpad in natural silver finish Touchpad cable L94033-001 L94034-001 L94032-001 Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover and rubber feet on page 38). 3. Remove the battery (see Battery on page 39). To remove the touchpad: 1. Disconnect the touchpad cable from the touchpad connector on the system board (1). 2. Remove the two Phillips M1.6 × 3.0 screws (2) and the two Phillips M1.6 × 2.0 screws (3) that secure the touchpad bracket to the computer. 3. Remove the touchpad bracket from the computer (4). 4. Remove the three broadhead Phillips M1.6 × 2.5 screws (5) that secure the touchpad to the computer. 5. Remove the touchpad from the computer (6). 40 Chapter 5 Removal and replacement procedures for authorized service provider parts