HP ENVY PC 13-ba1000 Maintenance and Service Guide - Page 56
Heat sink, Remove the six Phillips M2.0 × 3.0 screws
View all HP ENVY PC 13-ba1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Heat sink Table 5-8 Heat sink and thermal pad descriptions and part numbers Description Heat sink - UMA Heat sink - discrete Spare part number L94042-001 L94041-001 Before removing the heat sink, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover and rubber feet on page 38). 3. Remove the battery (see Battery on page 39). 4. Remove the fan. Remove the heat sink on models with discrete graphics: 1. Remove the six Phillips M2.0 × 3.0 screws (1) that secure the heat sink to the system board. 2. Remove the heat sink (2). Remove the heat sink on models with UMA graphics: 1. Remove the three Phillips M2.0 × 2.0 screws (1) that secure the heat sink to the system board. 48 Chapter 5 Removal and replacement procedures for authorized service provider parts