HP ENVY Rove 20-k014ca HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 44
and cables., Reverse this procedure to install the converter board.
View all HP ENVY Rove 20-k014ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4. Release the converter board cable from the clips (4) built into the X-axis capacitor board riser. 5. Remove the two Phillips PM3.0×4.5 screws (5) that secure the converter board to the middle frame. 6. Remove the converter board (6) and cables. Reverse this procedure to install the converter board. 36 Chapter 4 Removal and replacement procedures
4.
Release the converter board cable from the clips
(4)
built into the X-axis capacitor board riser.
5.
Remove the two Phillips PM3.0×4.5 screws
(5)
that secure the converter board to the
middle frame.
6.
Remove the converter board
(6)
and cables.
Reverse this procedure to install the converter board.
36
Chapter 4
Removal and replacement procedures