HP ENVY Rove 20-k014ca HP ENVY Rove 20 Mobile All-in-One PC - Maintenance and - Page 48
The left speaker/subwoofer includes three rubber isolators that are installed in
View all HP ENVY Rove 20-k014ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. Remove the right speaker (4) and cable. 5. Release the power connector cable from the clip (1) built into the left speaker/subwoofer. 6. Disconnect the left speaker/subwoofer cable (2) from the system board. 7. Release the left speaker/subwoofer cable from the clips (3) built into the middle frame. 8. Remove the three Phillips PM3.0×6.5 screws (4) that secure the left speaker/subwoofer to the middle frame. NOTE: The left speaker/subwoofer includes three rubber isolators that are installed in the screw holes (5). These isolators are crucial to the performance of the subwoofer. 9. Remove the left speaker/subwoofer (6) and cable. Reverse this procedure to install the speakers. 40 Chapter 4 Removal and replacement procedures
4.
Remove the right speaker
(4)
and cable.
5.
Release the power connector cable from the clip
(1)
built into the left speaker/subwoofer.
6.
Disconnect the left speaker/subwoofer cable
(2)
from the system board.
7.
Release the left speaker/subwoofer cable from the clips
(3)
built into the middle frame.
8.
Remove the three Phillips PM3.0×6.5 screws
(4)
that secure the left speaker/subwoofer to the
middle frame.
NOTE:
The left speaker/subwoofer includes three rubber isolators that are installed in the
screw holes
(5)
. These isolators are crucial to the performance of the subwoofer.
9.
Remove the left speaker/subwoofer
(6)
and cable.
Reverse this procedure to install the speakers.
40
Chapter 4
Removal and replacement procedures