HP ENVY TouchSmart 15-j119wm HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 61
to remove the disc cell RTC battery, from the socket
View all HP ENVY TouchSmart 15-j119wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to the base enclosure by double-sided tape.) 3. Remove the RTC battery. NOTE: Step 4 applies only to computer models equipped with an Intel processor. 4. Use a thin, non-conductive tool (1) to remove the disc cell RTC battery (2) from the socket on the system board. Component replacement procedures 51
2.
Detach the RTC battery
(2)
from the base enclosure. (The RTC battery is attached to the base
enclosure by double-sided tape.)
3.
Remove the RTC battery.
NOTE:
Step 4 applies only to computer models equipped with an Intel processor.
4.
Use a thin, non-conductive tool
(1)
to remove the disc cell RTC battery
(2)
from the socket on
the system board.
Component replacement procedures
51