HP ENVY TouchSmart m6-k054ca HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 50
USB/audio board
View all HP ENVY TouchSmart m6-k054ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Remove the 2 Phillips PM2.0×2.0 broadhead screws (2) that secure the speaker/subwoofer to the computer. NOTE: Make sure the rubber grommets are installed in the screw holes (3) when installing the speaker/subwoofer. 4. Remove the subwoofer (4). Reverse this procedure to install the left speaker/subwoofer. USB/audio board Description USB/audio board for use in AMD models (includes cable) USB/audio board for use in Intel models (includes cable) Spare part number 725452-001 729621-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Disconnect the battery cable (see Battery on page 32). 6. Remove the RJ-45 module cover (see RJ-45 module cover on page 40). 42 Chapter 4 Removal and replacement procedures