HP ENVY TouchSmart m6-k054ca HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 75
then lift the panel from the display enclosure, Remove the 4 Phillips PM 2.0x3.0 screws
View all HP ENVY TouchSmart m6-k054ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
11. If you need to remove the display panel, remove the display cable from the rear of the panel (1), and (if necessary) remove the WLAN antenna transceiver tape from the display panel (2) (3). 12. Remove the 4 Phillips PM 2.0x3.0 screws (1) that secure the panel to the display enclosure, and then lift the panel from the display enclosure (2). Component replacement procedures 67
11.
If you need to remove the display panel, remove the display cable from the rear of the panel
(1)
,
and (if necessary) remove the WLAN antenna transceiver tape from the display panel
(2) (3)
.
12.
Remove the 4 Phillips PM 2.0x3.0 screws
(1)
that secure the panel to the display enclosure, and
then lift the panel from the display enclosure
(2)
.
Component replacement procedures
67