HP ENVY m7-u100 Maintenance and Service Guide - Page 47

Power connector cable, that secure the power connector cable bracket

Get HP ENVY m7-u100 PDF manuals and user guides View all HP ENVY m7-u100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Power connector cable Description Power connector cable Spare part number 857437-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the power connector cable: 1. Remove the three Phillips M2.0×4.8 screws (1) that secure the power connector cable bracket to the keyboard/top cover. 2. Remove the power connector cable bracket (2). 3. Disconnect the power connector cable (3) from the system board. 4. Remove the power connector cable (4). Reverse this procedure to install the power connector cable. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Power connector cable
Description
Spare part number
Power connector cable
857437-001
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
26
).
Remove the power connector cable:
1.
Remove the three Phillips M2.0×4.8 screws
(1)
that secure the power connector cable bracket to
the keyboard/top cover.
2.
Remove the power connector cable bracket
(2)
.
3.
Disconnect the power connector cable
(3)
from the system board.
4.
Remove the power connector cable
(4)
.
Reverse this procedure to install the power connector cable.
Component replacement procedures
39