HP ENVY m7-u100 Maintenance and Service Guide - Page 60
Remove the 13 Phillips M2.5×6.7 screws, Remove the power connector cable bracket
View all HP ENVY m7-u100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3. Disconnect the WLAN antenna cables (3) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal. 4. Remove the four Phillips M2.0×4.8 screws (1) and the Phillips M2.0×3.8 screw (2) that secure the power connector cable bracket and the USB board bracket to the keyboard/top cover. 5. Remove the power connector cable bracket (3). 6. Remove the USB board bracket (4). 7. Remove the 13 Phillips M2.5×6.7 screws (1) that secure the display assembly to the keyboard/top cover. 52 Chapter 5 Removal and replacement procedures
3.
Disconnect the WLAN antenna cables
(3)
from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled “1/MAIN” connects to the WLAN module “Main” terminal.
The WLAN antenna cable labeled “2/AUX” connects to the WLAN module “Aux” terminal.
4.
Remove the four Phillips M2.0×4.8 screws
(1)
and the Phillips M2.0×3.8 screw
(2)
that secure the power
connector cable bracket and the USB board bracket to the keyboard/top cover.
5.
Remove the power connector cable bracket
(3)
.
6.
Remove the USB board bracket
(4)
.
7.
Remove the 13 Phillips M2.5×6.7 screws
(1)
that secure the display assembly to the keyboard/top cover.
52
Chapter 5
Removal and replacement procedures