HP EliteDisplay E243p User Guide - Page 26

Using the auto-adjustment function (analog input) The auto-adjustment feature automatically engages and attempts to optimize your screen under the following conditions: ● Monitor setup ● Factory reset of the computer ● Changing monitor resolution You can manually optimize the screen performance for the VGA (analog) input at any time from the Auto Adjustment menu in the OSD. You can download the auto-adjustment pattern software utility from http://www.hp.com/support. Do not use this procedure if the monitor is using an input other than VGA. If the monitor is using a VGA (analog) input, this procedure can correct the following image quality conditions: ● Fuzzy or unclear focus ● Ghosting, streaking, or shadowing effects ● Faint vertical bars ● Thin, horizontal scrolling lines ● An off-center picture To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the Menu button to open the OSD menu, select Image, and then select Auto Adjustment. If the result is not satisfactory, continue with the procedure. 3. Open the auto-adjustment utility. (You can download this utility from http://www.hp.com/support.) The setup test pattern is displayed. 4. Press the Esc key or any other key on the keyboard to exit the test pattern. 20 Chapter 3 Support and troubleshooting