HP FS7600 User Guide v75, mx705, MV7540, s7540, FS7600, v7650 17" CRT Mon - Page 12
Removing the Monitor Base, Connecting the Cables
UPC - 829160500720
View all HP FS7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Setting Up the Monitor Removing the Monitor Base In the event that you need to disassemble the base from the monitor, position the monitor bottom side up and follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of the monitor. 2. Lift the base up and away from the monitor. Connecting the Cables Before setting up the monitor, place it in a convenient, well-ventilated location near the computer. 1. Turn off the power to the computer and other peripheral devices. 2. Connect the power cord 1 to the back of the monitor, then connect the power cord to a power outlet. 3. Connect the video cable (blue connector) 2 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. Ä CAUTION: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector. Do not force the cable onto the connector. 3-2 User Guide