HP FS7600 User Guide v75, mx705, MV7540, s7540, FS7600, v7650 17" CRT Mon - Page 31
Troubleshooting, User Guide, Mode. Change your - monitor resolution
 |
UPC - 829160500720
View all HP FS7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Troubleshooting Problem "No Signal" is displayed on screen. "Out of Frequency" is displayed on screen. Monitor is overheating. Possible Cause Monitor video cable is disconnected. Video resolution and/or refresh rate are set higher than what your monitor supports. There is not enough air space to allow proper ventilation. Solution Connect the 15-pin monitor video cable to the computer. Be sure that the computer power is on. Restart your computer and enter Safe Mode. Change your settings to a supported setting (see "Technical Specifications"). Restart your computer so that the new settings take effect. Leave at least 3 inches (76 mm) of ventilation space around the monitor, and do not place objects on top of the monitor. User Guide A-3
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
Troubleshooting
User Guide
A–3
“No Signal” is
displayed on screen.
Monitor video cable is
disconnected.
Connect the 15-pin
monitor video cable
to the computer. Be
sure that the
computer power is
on.
“Out of Frequency” is
displayed on screen.
Video resolution and/or
refresh rate are set higher than
what your monitor supports.
Restart your computer
and enter Safe
Mode. Change your
settings to a
supported setting (see
“Technical
Specifications”).
Restart your computer
so that the new
settings take effect.
Monitor is
overheating.
There is not enough air space
to allow proper ventilation.
Leave at least 3
inches (76 mm) of
ventilation space
around the monitor,
and do not place
objects on top of the
monitor.
Problem
Possible Cause
Solution