HP HDX X16-1001XX HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 46
Hard drive, Loosen the four Phillips PM2.5×6.0 captive screws
View all HP HDX X16-1001XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Hard drive ✎ The hard drive spare part kit includes a left and right hard drive bracket, Mylar sleeve, connector, and four isolators. Description 500-GB, 5400-rpm 400-GB, 5400-rpm 320-GB, 7200-rpm 320-GB, 5400-rpm 250-GB, 5400-rpm 160-GB, 7200-rpm 160-GB, 5400-rpm Spare part number 498071-001 498072-001 505857-001 498069-001 505856-001 498068-001 498070-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). Remove the hard drive: 1. Loosen the four Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer. 2. Lift the rear edge of the hard drive cover 2, swing it up and forward, and then remove the cover 3. The hard drive cover is included in the Plastics Kit, spare part number 496477-001. Removal and replacement procedures 4-11