HP HDX X16-1001XX HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 64
LED board cable, Keyboard see
View all HP HDX X16-1001XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
LED board cable ✎ The LED board cable is included with the keyboard cover, spare part number 496472-001. Before removing the LED board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). 5. Remove the following components: a. Switch cover (see "Switch cover" on page 4-18) b. Keyboard cover (see "Keyboard cover" on page 4-20) c. Keyboard (see "Keyboard" on page 4-24) Remove the LED board cable: 1. Release the ZIF connector 1 to which the LED board cable is attached and disconnect the LED board cable from the system board. 2. Remove the LED board cable 2. Reverse this procedure to install the LED board cable. Removal and replacement procedures 4-29