HP HDX X16-1001XX HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 92
Reverse this procedure to install the subwoofer., Remove the two Phillips PM2.5×5.0 broadhead screws
View all HP HDX X16-1001XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Remove the subwoofer: 1. Remove the subwoofer cable 1 from the clips 2 and routing channel built into the base enclosure. 2. Remove the two Phillips PM2.5×5.0 broadhead screws 3 that secure the subwoofer to the base enclosure. ✎ The rubber grommets 4 should be inspected and replaced in the correct locations on the subwoofer. These grommets are critical for satisfactory subwoofer performance. 3. Remove the subwoofer 5 by lifting it straight up. Reverse this procedure to install the subwoofer. Removal and replacement procedures 4-57
Removal and replacement procedures
4–57
Remove the subwoofer:
1. Remove the subwoofer cable
1
from the clips
2
and routing channel built into the base enclosure.
2. Remove the two Phillips PM2.5×5.0 broadhead screws
3
that secure the subwoofer to the base enclosure.
✎
The rubber grommets
4
should be inspected and replaced in the correct locations on the subwoofer. These
grommets are critical for satisfactory subwoofer performance.
3. Remove the subwoofer
5
by lifting it straight up.
Reverse this procedure to install the subwoofer.