HP Indigo W7200 Writing Head Service Instructions -- CA393-00150Document P/N: - Page 18
WritingHeadFocus.jlt, Writing Head
View all HP Indigo W7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
It is recommended to adjust the skew value to less than 0.2 mm especially when printing duplex. 3. To adjust the skew value: a. Loosen the two skew locking screws. b. Turn the Skew adjustment knob to move the writing head slightly. Figure 3-1 Skew, leveling and focus adjustment knobs - input view 1 Allen M4 securing screw 2 Two skew locking screws 3 Leveling adjustment knob 4 Skew adjustment knob Color adjust Do the following to verify and adjust the color. 1. Print the WritingHeadFocus.jlt job. 2. From press computer, run the following application: C:\Unicorn\Release\mmi_writingHeadD.exe. The Writing Head window opens. 3. Click the Laser Power tab. Enter the Black Level value and select Override. NOTE: The Laser Power value shown on the screen will only change to your new value after printing. Color adjust 15