HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 Onboard Administra - Page 130
Power and Thermal screen, HP Integrity, Superdome 2 Installation Guide
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
For proper installation of the power supplies into a compute enclosure, see the HP Integrity Superdome 2 Installation Guide. Power and Thermal screen Item Enclosure Ambient Temperature Thermal Subsystem Status Power Subsystem Status Power Mode Present Power Power Limit Description This box displays the highest ambient temperature being reported by the installed blade devices. If no blade devices are installed, then this box displays the temperature of the Onboard Administrator module as an approximation of the ambient temperature. The overall thermal status of the enclosure. Possible values are Unknown, OK, Degraded, or Critical Error. The overall power status of the enclosure. Possible values are Unknown, OK, Degraded, or Critical Error. A user setting to configure the enclosure dc power capacity and the input power redundancy mode of the enclosure. See Power Management for possible values. The amount of watts being consumed by all devices in the enclosure. The maximum amount of power available for consumption by the enclosure measured in watts. NOTE: The Power Limit is dependent on the enclosure power redundancy setting and the number and location of the power supplies in the enclosure. If a Static Power Limit has been specified, the Power Limit displays that limit. 130 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices