HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 Onboard Administra - Page 83
AlertMail screen, Changing settings, Virtual Buttons tab
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Changing settings You can change enclosure settings from this screen. To save the settings after making the changes, click the Apply button. Item Enclosure Name Rack Name Asset Tag Possible value Description 1 to 32 characters including all The name of the selected enclosure alphanumeric characters, the dash (-), and the underscore (_) 1 to 32 characters including all The name of the rack in which the alphanumeric characters, the dash (-), enclosure is installed and the underscore (_) 0 to 32 characters including all The asset tag is used for inventory alphanumeric characters, the dash (-), control. and the underscore (_) The default asset tag is blank Virtual Buttons tab To change the state of the enclosure UID, click the Toggle On/Off button. The enclosure UID is located to the left of the Enclosure link-down port. AlertMail screen AlertMail enables users to receive system events by email instead of using SNMP traps. AlertMail is completely independent from SNMP, and both can be enabled at the same time. AlertMail uses standard SMTP commands to communicate with an SMTP-capable mail server. The "Reply To" address for each email sent by AlertMail is @. To enable the AlertMail feature, select the Enable AlertMail check box. To test the AlertMail function: 1. Be sure that the email address, alert sender domain, and SMTP server settings are correct. 2. Select the Send Test AlertMail button. 3. To confirm that the test completed successfully, verify the recipient email account. Enclosure settings 83