HP Integrity Superdome 2 32-socket HP Integrity Superdome 2 Onboard Administra - Page 50
Onboard Administrator Network Settings screen, SNMP Settings screen
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Onboard Administrator Network Settings screen Use the Onboard Administrator Network Settings screen to modify network settings for all the Onboard Administrator modules in the selected enclosures. Settings for Standby Onboard Administrator modules appear only if the modules are present. Options for DHCP and static IP are supported. • Use DHCP for all Active Onboard Administrators: Get the IP address for the Onboard Administrator from a DHCP server. The Standby check box is shown only if there is a Standby Onboard Administrator in the enclosure. • Enable Dynamic DNS: Enable using a DNS server to translate host names into IP addresses when using DHCP. • Use static IP settings for each Active Onboard Administrators: Manually set up static IP settings for the Onboard Administrator. The Standby check box is shown only if there is a Standby Onboard Administrator in the enclosure. For possible values and descriptions of each box, see "TCP/IP Settings screen" (page 101). SNMP Settings screen Use the SNMP Settings screen to configure or modify the SNMP settings for the active HP Superdome 2 Onboard Administrator. 50 First Time Setup Wizard