HP Integrity Superdome 2 32-socket HP Integrity Superdome 2 Onboard Administra - Page 94
SNMP Settings screen, Device list, System Information settings
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Device list Column Bay Enabled EBIPA Address Autofill Current Address Device Type Description The bay in the enclosure of the device. Enables EBIPA settings for the device bay. EBIPA settings for all device bays can be enabled by selecting the check box next to Enabled in the heading row or individual device bays can be selected by clicking the check box for that particular device bay. The static IP address you want to assign to the device bay. Assigns consecutive IP addresses for the selected device bays below in the device list. Click the autofill down arrow to assign the IP addresses. The current IP address of the device bay. The type of device installed in the device bay. SNMP Settings screen The Onboard Administrator supports SNMP Version 1 and several groups from the standard MIB-II MIB. Additional information about the enclosure infrastructure is available in the HP Rack Information MIB. CPQRACK-MIB, which is part of the Insight Management MIBs, is available on the Management CD in the Superdome 2 Essentials Foundation Pack. The SNMP Settings screen enables you to enter system information and community strings and designate the management stations that can receive SNMP traps from the Onboard Administrator. If you select Enable SNMP, then the Onboard Administrator responds to SNMP requests over UDP port 162. Port 162 is the standard UDP port used to send and receive SNMP messages. System Information settings In the System Information subcategory, information about the Onboard Administrator SNMP system can be enabled and configured. 94 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices