HP Integrity rx2620 Windows Integrity Management Agents Reference - Page 99
the Cell Board, Cell Power Board and PDH, Virtualizing the Dual Core Interposer has failed.
View all HP Integrity rx2620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
9371 9372 9373 9375 9376 9379 9380 9382 9383 9385 9388 9389 9390 9391 9392 9394 9403 9412 9417 9418 PDC bug. Contact HP Support to check for PDC upgrade. Hardware connecting cells in the partition experienced a problem such that cells in the partition together can no longer communicate. Troubleshoot the fabric and replace backplane or cells. Gather event logs and contact HP Customer Support for assistance. Hardware problem with the CPU chip, CC chip, Troubleshoot the cell and/or replace it. Contact or PDH flash. HP Customer Support for assistance. Hardware connecting cells in the partition experienced a problem such that cells in the partition together can no longer communicate. Troubleshoot the fabric and replace backplane or cells. Contact HP Customer Support for assistance. PDC bug in which passed invalid arguments. Upgrade PDC if there is a fix. MX2 initialization failed Reboot. If problem persists contact your HP representative for support. The second CPU in the Dual Core has been deconfigured as a result of the first core being deconfigured. Investigate the cause of the first core being deconfigured FW failed to virtualize the mx2 interposer. Reboot. If problem persists contact your HP representative for support. Reboot. If problem persists contact your HP Virtualizing the Dual Core Interposer has failed. representative for support. Reboot. If problem persists contact your HP Installation of the FW PMI handler has failed. representative for support. If this is in manufacturing, re-program the FRU specific field of the FRU data for the cell or CPU A Cell or CPU module's FRU data is programmed module. Otherwise, contact HP Support incorrectly. personnel to troubleshoot the problem. A hardware fault has occurred. Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. A hardware fault has occurred. Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. Hardware failure. Fix the hardware, pdh riser or cell. A hardware fault has occurred. Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. All cpus on the cell have been scheduled for deconfiguration. On the next reset, the cell will no longer be operational; system firmware will deconfigure all the cpus and this cell will not be part of a partition. This action is not recommended. To recover, the NVRAM on the PDH card must be cleared, the cell power cycled, and defaults restored from disk. Fabric ReadError. Check XBC, CC, links, etc. Failure to read or write CC CSRs. Contact HP Support personnel to check the Check CC. A power source has been removed from the chassis. A power source has been removed from the chassis. Platform Events - Table 2 (Windows System Log Event ID, Cause, Recommended Action) 99