HP Integrity rx3600 HP Insight Manager WBEM Provider Events Reference - Page 31
MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was
View all HP Integrity rx3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Event ID Event Severity 5646 Warning 5655 Warning 5656 Warning 5657 Warning 5658 Warning 5659 Warning 5677 Warning 5679 Warning 5682 Warning 5683 Warning 5684 Warning 5685 Warning Event Description MC: I/O error log/clear error. Probable Cause: SFW's Machine Check Handler was unable to log or clear I/O error registers. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 440. WBEM ProviderName: FPL_IndicationProvider. MC: MCA to BERR escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BERR. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 441. WBEM ProviderName: FPL_IndicationProvider. MC: MCA to BINIT escalation not supported by PAL. Probable Cause: Cannot escalate an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using diagnostic tools and EFI tools. WBEM EventID: 442. WBEM ProviderName: FPL_IndicationProvider. MC: Get PAL features failed. Probable Cause: SFW failed to get the feature set from PAL Recommended Action: Update firmware to get newer PAL that support the PAL_GET_FEATUREs call. WBEM EventID: 443. WBEM ProviderName: FPL_IndicationProvider. MC: Previous PAL rendezvous failed; rebooting. Probable Cause: PAL Failed to rendezvous the processors during a MCA. Recommended Action: Review error logs to determine cause of MCA. If problem persists, contact HP support to troubleshoot the problem. WBEM EventID: 444. WBEM ProviderName: FPL_IndicationProvider. MC: Set PAL features failed. Probable Cause: SFW failed to set the feature set from PAL. Recommended Action: update newer system firmware with the new PAL that support the PAL_SET_FEATURES call. WBEM EventID: 445. WBEM ProviderName: FPL_IndicationProvider. MC: Monarch failed in slave rendezvous. Probable Cause: A slave failed to rendezvous. Recommended Action: Reboot if necessary, if problem persists contact your HP representative for support. WBEM EventID: 446. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: Rendezvous vector out of range. Probable Cause: A bad rendezvous vector has been registered. Recommended Action: Reboot if necessary to re-register vector, if problem persists contact your HP representative for support. WBEM EventID: 447. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: No MC monarch. Probable Cause: Software is making a SAL_MC_RENDEZVOUS call when it shouldn't. Recommended Action: Just a warning that software or OS is making a call when it shouldn't. SFW will ignore the call when this happen. Need to fix OS or software to not make the SAL_MC_RENDEZVOUS when there is no monarch processor chosen. WBEM EventID: 448. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: No wakeup registered. Probable Cause: OS or Software is calling SAL_MC_RENDEZ without registering a method to wake-up the processor. Recommended Action: OS or Software needs to be fixed to register a wake-up mechanism before calling SAL_MC_RENDEZ. WBEM EventID: 449. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: MCA escalation not supported by PAL. Probable Cause: PAL does not support the call to escalate further local MCA to global MCA. Recommended Action: Update SFW with contain a new PAL that support this feature. If no new PAL that support this feature, no action should be taken further. WBEM EventID: 450. WBEM ProviderName: FPL_IndicationProvider. MC_RENDEZVOUS: Get PAL features failed. Probable Cause: PAL does not support call to get the processor feature set during processor rendezvous. Recommended Action: Update system firmware with a new PAL that support the PAL_GET_FEATURES call. WBEM EventID: 451. WBEM ProviderName: FPL_IndicationProvider. Platform Events 31