HP Integrity rx5670 Site Preparation Guide - HP Integrity rx5670 (A6837B/A683 - Page 9
Environmental Specifications
View all HP Integrity rx5670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
System Specifications Environmental Specifications Environmental Specifications This section provides the temperature/humidity requirements, noise emission, and air flow specifications for the HP Server. Temperature and Humidity Specifications Ambient intake air temperature is often different from ambient room temperature; you should measure the operating temperature and humidity directly in front of the cabinet cooling air intakes rather than just checking ambient room conditions. Table 1-6 Computer Environment Parameter Temperature Relative humidity Operating Range 5oC to 35oC (up to 5,000 feet) 15% to 80% at 35oC noncondensing Recommended Operating Range Maximum Rate of Change 20oC to 25oC (up to 5,000 feet) 10oC/hr with tape 20oC/hr without tape 40% to 60% at 35oC noncondensing 30% per hour noncondensing Non-Operating Range -40oC to +70oC NOTE Operating ranges refer to the ambient air temperature and humidity measured at the cabinet cooling air intake vents. Acoustic Noise Specification The acoustic noise specification for the HP Server is as follows: • < 60 db LpA (sound pressure level at bystander position) The above level is appropriate for dedicated computer room environments, not office environments. Care should be taken to understand the acoustic noise specifications relative to operator positions within the computer room or when adding HP Servers to computer rooms with existing noise sources. Air Flow The recommended cabinet air intake temperature is between 68oF and 77oF (20oC and 25oC) at 960 CFM. Chapter 1 9