HP Jetdirect 250m HP Jetdirect 200m Print Server (English) User Guide - Page 86
Is the Status light ON solid green or intermittently flickering, green?, Status light, latch button
View all HP Jetdirect 250m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Is the Status light ON (solid green or intermittently flickering green)? Check the Status light on your print server. If all connections are working correctly, it should be ON solid green (bright green in color and glowing continuously or flickering intermittently, but not blinking regularly). If it is not ON (solid green or intermittently flickering), please follow the troubleshooting steps below. Status light latch button Note: For all of the steps below, note that when you first apply power to a normally operating print server (by plugging it in to the printer's LIO slot), the Status light will slowly blink green for several seconds during self-test. When it has completed self-test, it will continue to blink green until you connect the network cable. Once the print server establishes a valid network connection, the Status light will go ON solid green; this indicates that the unit is ready for operation. Intermittent flickering (green) indicates network activity. 1. Check that the printer's power cord is plugged in and that the printer is switched ON. 2. Check that the print server is seated firmly in the printer's LIO slot and that the network cable is securely connected to the print server's network connector. 3. If that doesn't cause the Status light to come on (solid green or intermittently flickering green), remove and re-insert the print server, as follows: a. Disconnect the network cable from the print server. b. Grasp and press the latch buttons (one on each side of the print server) and pull the print server out of the printer's LIO slot.