HP Jetdirect 695nw HP Jetdirect Print Servers 640n and 695n - Administrator's - Page 64
TCP/IP Diagnostics, Optional. Password to determine which SNMP GetRequests the HP Jetdirect print
View all HP Jetdirect 695nw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Table 3-3 Telnet Commands and Parameters (continued) default-ip-dhcp Periodically transmit DHCP requests when a legacy default IP address of 192.0.0.192 or a link-local IP address of 169.254.x.x is automatically assigned. 0: Disable DHCP requests. duid dns-cache-ttl dhcp-arbitration 1 (default): Enable DHCP requests. DHCP unique identifier for a client, using a hexadecimal string to represent up to 260 characters. Time-to-live for a cached DNS name, in seconds. Set from 0 to 4294967295 seconds. Names are not cached. 0: Disable. Amount of time, in seconds, that the print server waits for DHCP configuration offers. Set from 1 to 10 seconds. 0: Disable. 5 (default): Enable. stateless-dhcpv4 Allow automatic configuration of additional IP parameters from a DHCPv4 server even when the print server is statically configured (such as a manually configure IP address, subnet mask and default gateway). 0 Disable. TCP/IP Diagnostics Last Config IP 1 (default): Enable. (Read-only parameter.) IP address of the system from which the HP Jetdirect print server's IP address was configured. TCP Conns Refused (Read-only parameter.) Number of client TCP connections that are refused by the print server. TCP Access Denied DHCP Lease Time (Read-only parameter.) Number of times that client systems were denied access to the print server because the print server's host access list does not contain an allowable entry. (Read-only parameter.) DHCP IP address lease duration time (seconds). DHCP Renew Time (Read-only parameter.) DHCP T1 timeout, specifying the DHCP lease renewal time in seconds. DHCP Rebind Time (Read-only parameter.) DHCP T2 timeout, specifying the DHCP lease rebind time in seconds. SNMP snmp-config get-cmnty-name SNMP operation on the print server. CAUTION: Disabling SNMP disables all SNMP agents (SNMP v1, v2, v3) and communications with management applications, such as HP Web Jetadmin. In addition, firmware upgrades through current HP downloading utilities is disabled. 0: Disable. 1 (default) Enable. Optional. Password to determine which SNMP GetRequests the HP Jetdirect print server responds to. If a Get community name is set, the print server responds to either a user-specified community name or the factory-default. Enter up to 255 alphanumeric characters. 54 Chapter 3 TCP/IP configuration ENWW