HP KVM CAT5 0x1x8 KVM Server Console Switch Maintenance and Service Guide - Page 32
Removing the console switch cantilever-mount hardware, Replacing the console switch side-mount
View all HP KVM CAT5 0x1x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removing the console switch cantilever-mount hardware 1. Remove the screws securing the console switch to the rail. 2. Remove the clip nuts or cage nuts, if necessary. 3. Remove the screws securing the 1U brackets to the console switch. Replacing the console switch side-mount hardware Type A-square- and round-hole rails 1. Remove the four screws, two on each side, from the console switch. Removal and replacement procedures 32
Removal and replacement procedures
32
Removing the console switch cantilever-mount hardware
1.
Remove the screws securing the console switch to the rail.
2.
Remove the clip nuts or cage nuts, if necessary.
3.
Remove the screws securing the 1U brackets to the console switch.
Replacing the console switch side-mount hardware
Type A—square- and round-hole rails
1.
Remove the four screws, two on each side, from the console switch.