HP KVM CAT5 0x1x8 KVM Server Console Switch Maintenance and Service Guide - Page 37
Replacing the console switch cantilever-mount hardware
View all HP KVM CAT5 0x1x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5. Secure the console switch to the rails using two M-6 screws, one on each side. Replacing the console switch cantilever-mount hardware Type A-round-hole rails 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws you removed. Removal and replacement procedures 37
Removal and replacement procedures
37
5.
Secure the console switch to the rails using two M-6 screws, one on each side.
Replacing the console switch cantilever-mount hardware
Type A—round-hole rails
1.
Remove the four screws, two on each side, from the console switch.
2.
Attach the 1U brackets to the console switch using the four screws you removed.