HP KVM CAT5 0x1x8 KVM Server Console Switch Maintenance and Service Guide - Page 35
Replacing the console switch standard-mount hardware
View all HP KVM CAT5 0x1x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Slide the side-mounting bracket tabs into the U locations on each side of the rack. 4. Install four cage nuts into the side-mounting bracket U locations. 5. Secure the console switch to the rails, using four M-6 screws, two on each side. Replacing the console switch standard-mount hardware 1. Remove the four screws, two on each side, from the console switch. Removal and replacement procedures 35
Removal and replacement procedures
35
3.
Slide the side-mounting bracket tabs into the U locations on each side of the rack.
4.
Install four cage nuts into the side-mounting bracket U locations.
5.
Secure the console switch to the rails, using four M-6 screws, two on each side.
Replacing the console switch standard-mount hardware
1.
Remove the four screws, two on each side, from the console switch.