HP KVM CAT5 0x1x8 HP IP Console Switch with Virtual Media User Guide - Page 81
the Main Menu., performing a self-test. Approximately 10 seconds after it stops blinking, press
![]() |
View all HP KVM CAT5 0x1x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4. If the supplied power cord is not already connected, plug it into the power cord connector ("Console switch components" on page 6) on the console switch, and then plug it into a valid power source. 5. Power on the console switch, if it is not already powered on. The activity indicator light ("Console switch components" on page 6) powers on. The activity indicator blinks for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the Enter key to access the Main Menu. Upgrading the firmware 81
![](/manual_guide/products/hewlettpackard-af602a-hp-ip-console-switch-virtual-media-user-guide-cd385d1/81.png)
Upgrading the firmware 81
4.
If the supplied power cord is not already connected, plug it into the power cord connector ("
Console
switch components
" on page
6
) on the console switch, and then plug it into a valid power source.
5.
Power on the console switch, if it is not already powered on. The activity indicator light ("
Console
switch components
" on page
6
) powers on. The activity indicator blinks for 30 seconds while
performing a self-test. Approximately 10 seconds after it stops blinking, press the
Enter
key to access
the Main Menu.