HP Kayak XU 04xx HP FastRAID - Installation and Configuration Guide - Page 19

CAUTION NOTE Follow these steps to delete an array: 1 Select Disk Array Operations from the Main Menu. 2 Select Delete Array from the Disk Array Operations menu. 3 When the list of arrays appears, select the array you want to delete. A warning appears if you select an array that has partitions. Do not delete an array with partitions if it contains data you want to keep, because any existing data will be erased. Be especially careful not to select your boot array! 4 View information about the array and make sure you really want to delete it. Press any key to continue. 5 Type y to delete the array (or n to cancel the operation). 6 When the message [Array name] deleted appears, press any key to continue. The drives that were formerly part of the array can now be used as stand-alone drives or as members of another array. Deleting an array may change the boot order and the drive assignment of other arrays and disks. You can identify individual drives by blinking the drive lights while you are running the HP RAID Device Manager software. Refer to the HP RAID Device Manager Software online documentation for more information. 16 English English