HP Kayak XU 04xx HP FastRAID - Installation and Configuration Guide - Page 5

Introduction HP FastRAID uses RAID technology to accelerate the performance of your PC's hard drives. Rather than focusing on data protection, as with server-based RAID technologies, HP FastRAID brings top performance to your computer. With HP FastRAID Pre-Installed on Your PC Workstation With HP FastRAID already installed on your PC Workstation, you will receive the following components: • Windows NT installation CD-ROM & 3 Setup diskettes, • a Windows NT Service Pack CD-ROM, and • an HP Kayak Drivers and Utilities CD-ROM. To find out more about configuring HP FastRAID, refer to "Configuring HP FastRAID" on page 4. HP FastRAID Accessory Kit NOTE The HP FastRAID Accessory Kit provides the components necessary to implement FastRAID on suitably equipped PCs or PC Workstations. The HP FastRAID accessory kit includes the following components: • an Adaptec®ARO-1130 PCI RAIDportTM adapter, • CI/OTM Array Management software (3 HP RAID Device Manager diskettes), • an ArrayConfig utility diskette, and • an Array 1000 Family manager drivers diskette You will also need the Windows NT installation CD-ROM & Setup diskettes, and the Windows NT Service Pack CD-ROM that came with your XU or XW PC Workstation. To find out how to install and configure HP FastRAID, refer to "Installing HP FastRAID" on page 3, and "Configuring HP FastRAID" on page 4. The HP FastRAID Accessory Kit is intended for use only with HP Kayak XU and XW PC Workstations equipped with a RAIDport connector running Windows NT 4.0. 2 English English