HP Kayak XU 04xx HP Kayak XU & XW PC Workstation - User's Guide - Page 36

3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems Pre-Boot Checks Using HP MaxiLife to Diagnose Problems Your HP LCD can help you to diagnose problems with your PC Workstation, even when you are unable to get your system and monitor working properly. When you press your PC Workstation's on/off button, HP MaxiLife will check your system before it initiates the start-up sequence. You will see one of the following screens on the LCD as these checks progress: Error! No CPU 1 Error! CPU Socket 2 Error! Power CPU 1 Error! Power CPU 2 Check that processor is correctly installed in socket 1. Check that a processor or Check installation of VRM 1. terminator is correctly installed in socket 2. Check installation of VRM 3. Error! CPU Freq Error! CPU Type Error! Power Cache Error! Board PLL Ensure that the two processors installed are the same speed (frequency). Ensure that the two processors Ensure that VRM is correctly installed have the same cache installed in VRM 2 socket. voltage. Check system board. Error! Power supply Error! Power Error! RAM type Error! No RAM Check power supply and power cable connections. Error! BIOS Check that configuration of Check that RAM types VRMs and terminators is correct installed are compatible. or that the power supply is properly connected. Error! No Video HP KAYAK XU Check memory installation. Flash new BIOS or start system Check that graphics card is using crisis switch (system board installed correctly. switch 10). No errors occurred during pre-boot. POST is initiated. 28 English