HP Kayak XU 04xx HP Kayak XU & XW PC Workstation - User's Guide - Page 37

Other Features

Get HP Kayak XU 04xx PDF manuals and user guides View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

POST Phase 3 Troubleshooting Your HP PC Workstation Using HP MaxiLife to Diagnose Problems Following these checks, the POST (Power-On Self Test) sequence is initiated. One of the following screens will appear in this phase: HP KAYAK XU No errors occurred. Error! POST XXXX A POST error occurred. Refer to the Upgrade and Configuration Guide for more information. Other Features HP MaxiLife can also be configured to: • Display the configuration details of your PC Workstation required to obtain support (System info.) • Indicate POST (Power-On Self Test) steps during the power-on phase (Boot steps) • Perform diagnostic tests on your PC Workstation's various hardware components and display the results (Diags). To configure your HP LCD: 1 Ensure that your PC Workstation's power cord is connected to a grounded outlet. In this state, your PC Workstation's hardware management chip is active, even if your system is not powered on. 2 Press one of the LCD control buttons. The following menu is displayed. System info Boot steps Next Go Diags Exit Next Go 3 Use to scroll down through the menu items and to select the required menu item. English 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
English
29
3
Troubleshooting Your HP PC Workstation
Using HP MaxiLife to Diagnose Problems
POST Phase
Following these checks, the POST (Power-On Self Test) sequence is
initiated. One of the following screens will appear in this phase:
Other Features
HP MaxiLife can also be configured to:
•
Display the configuration details of your PC Workstation required to
obtain support
(System info.)
•
Indicate POST (Power-On Self Test) steps during the power-on
phase
(Boot steps)
•
Perform diagnostic tests on your PC Workstation’s various hardware
components and display the results
(Diags)
.
To configure your HP LCD:
1
Ensure that your PC Workstation’s power cord is connected to a
grounded outlet.
In this state, your PC Workstation’s hardware management chip is
active, even if your system is not powered on.
2
Press one of the LCD control buttons. The following menu is
displayed.
3
Use
to scroll down through the menu items and
to select the
required menu item.
No errors occurred.
A POST error occurred. Refer to the
Upgrade and Configuration Guide
for more information.
Error!
POST XXXX
HP KAYAK XU
System info
Boot steps
Next
Go
Diags
Exit
Next
Go