HP Kayak XU 04xx HP Kayak XU Series 04xx, HP MaxiLife Hardware Monitoring - Page 25

HP MaxiLife® Hardware Monitoring Error Message Summary The following table lists the error codes, causes and symptoms, and the accompanying short messages that are displayed in the upper left corner of the screen. Code # Cause / Symptom 0000h Any POST error that is not listed below 0010h 0011h 0012h 0020h 0021h CMOS Checksum error (if no Serial EEProm) Date and Time (CMOS backed up from SE2P) PC configuration lost (both SE2P and CMOS lost) Any POST error regarding an AT option ROM Any POST error regarding an external PCI card issue 0022h Any POST error regarding an AT PnP issue 0030h 0040h Unsupported CPU speed switch setting Serial number corrupted (bad checksum or null #) 0041 Product flag not initialized or bad 0050h Fan not connected (according to CPU) 0060h RPO initialization failure 0100h 0101h 0102h 0103h Keyboard stuck key Keyboard self-test failure Keyboard controller I/O access failure Keyboard not connected 0105h Mouse self-test failure 0106h Mouse not detected (but configured in CMOS) 0108h Mouse and Keyboard connectors reversed 0200h Conflict on serial port (@, IRQ) 0201h Conflict on parallel port (@, IRQ, DMA) 0300h Floppy A: self-test failure 0301h Floppy B: self-test failure Short message (US) System error Incorrect CMOS Checksum Date and Time Lost Incorrect PC Configuration Option ROM Error PCI Error ISA P1P Error Wrong CPU Speed Setting Invalid PC Serial Number Invalid Internal product type Fan Not Connected Remote Power On Error Keyboard Error Keyboard Error Keyboard Error Keyboard Not Connected Mouse Error Mouse Error Keyboard and Mouse Error Serial Port Error Parallel Port Error Flexible Disk Drive A Error Flexible Disk Drive B Error 25