HP Kayak XU 04xx HP Kayak XU Series 04xx, SCSI Administration Guide - Page 11

Configuring the SCSI Bus • Plug and Play Scam Support When enabled, this option automatically configures Plug and Play compatible SCSI devices. For SCSI devices that do not support Plug and Play, set this option to Disabled. By default, it is enabled. • Extended BIOS Translation for DOS Drives >1 GByte This option is no longer used (and must always be "Enabled"). • Reset SCSI Bus at IC Initialization When the SCSI controller receives an IC Reset command from the central processor, it can reset either itself and the SCSI bus, or just itself. By default, it will reset both itself and the SCSI bus. • Host Adapter BIOS This option enables or disables the SCSI Adapter BIOS. Several options in SCSISelect utility are only valid if the SCSI adapter BIOS is enabled. The SCSI adapter BIOS must be enabled if the computer boots from a SCSI hard disk drive. This option is enabled by default. • Support Removable Disks Under BIOS as Fixed Disks When Boot Only is selected, only the removable media drive designated as the boot device is treated as a hard disk drive. If All Disks is selected, all removable-media drives supported by the BIOS are treated as hard disk drives. No removable-media drives are treated as hard disk drives when Disabled is selected. In this case, removable-media drives must be controlled through operating system drivers. • Display Message During BIOS Initialization When enabled, this option displays the message Press for SCSISelect(TM) Utility during BIOS initialization. When disabled, this message is not displayed, although you can still press the key for the SCSISelect utility. This option is enabled by default. • BIOS Support for Int13 Extensions When enabled, this option provides BIOS support for hard disk drives with more than 1024 cylinders. It is enabled by default. 6 English