HP Kayak XU 04xx HP Kayak XU Series 04xx, SCSI Administration Guide - Page 20

Sync Rate (Mega Bytes/sec) Width (bits) NOTE Configuring the SCSI Bus Device Setup Menu When you select a device from the Device Selections menu, the Device Setup menu is displayed: Symbios Logic SCSI Configuration Utility Version 1.00 1. SYM53C875 Dev0 N/A Setup Sync Rate (Mega Bytes/sec) 40 MB/sec Width (bits) 16 Disconnect On Read Write I/O Timeout (secs) 10 Scan for Device at Boot Time Yes Scan for SCSI LUNS Yes Queue Tags On Format Verify Help. Restore Default Setup Exit this menu. Use arrow keys to select from menu. Then press ENTER BIOS Code Segment: C800 This menu provides information about an individual SCSI device. To make changes to these settings, select an item from the list and press . This option lets you set the transfer rate for the device. The available choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a Fast SCSI device, you would select 10 MB/sec. This option lets you set the maximum SCSI data width at which a 16-bit host adapter negotiates. The host adapter and SCSI device must agree on a width at which they can both operate For example, if you have a 16-bit device on a 8-bit wide cable (bus), the width at which they can both operate is 8-bits. Similarly, if you have an 8-bit device on a 16-bit wide cable (bus), the width at which they can both operate is 8-bits. If a 16-bit device is used on an 8-bit wide cable, you may need to disable SCAM. English 15