HP Kayak XU 04xx HP Kayak XU Series 04xx, SCSI Administration Guide - Page 7
Con View, Interface Settings Menu
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Configuring the SCSI Bus Use the and keys and the key to make selections in the SCSISelect utility. Press at any time to return to the previous menu. Configure/View It is recommended that you do not change these settings. Interface Settings Menu SCSISelect(TM) Utility v1.xxx Configuration SCSI Bus Interface Definitions Host Adapter SCSI ID 7 SCSI Parity Checking Enabled Additional Options Boot Device Options Press SCSI Device Configuration Press Advanced Configuration Options Press - Reset to Host Adapter Defaults BIOS Information Interrupt (IRQ) Channel 15 I/O Port Address F800h SCSI Channel Interface Definitions: • Host Adapter SCSI ID Changes the adapter SCSI ID from its default value of 7. • SCSI Parity Checking Enable or disable host adapter SCSI parity checking. Most currently available SCSI devices do support SCSI parity. You should disable SCSI Parity Checking if any of the attached SCSI devices do not support SCSI parity. Additional Options: • Boot Device Options Press to display the Boot Device Configuration menu, described on the next page. • SCSI Device Configuration Press to display the SCSI Device Configuration menu. 2 English
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-series-04xx-scsi-administration-guide-e9e78d6/7.png)