HP L5006tm L5006tm and L5009tm Touchscreen Monitors User Guide - Page 31

Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognized these preset modes and they will appear properly sized and centered on the screen. HP L5006tm and L5009tm Table B-5 Factory Preset Modes Preset Pixel Format 1 VGA 640 x 350 70Hz 2 VGA 720 x 400 70Hz 3 VGA 640 x 480 60Hz 4 MAC 640 x 480 66Hz 5 VESA 640 x 480 72Hz 6 VESA 640 X 480 75Hz 7 VESA 800 X 600 56Hz 8 VESA 800 X 600 60Hz 9 VESA 800 X 600 75Hz 10 VESA 800 x 600 72Hz 11 MAC 832 x 624 75Hz 12 VESA 1024 x 768 65Hz 13 SUN 1024 x 768 65Hz 14 VESA 1024 x 768 70Hz 15 VESA 1024 x 768 75Hz Horz Freq (kHz) 31.5 31.47 31.47 35.00 37.86 37.50 35.16 37.88 46.88 48.08 49.72 48.36 52.45 56.48 60.02 Band Width (MHz) 28.322 28.322 25.175 32.24 31.5 31.5 36 40 49.5 50 57.283 65 70.49 75 78.75 Entering User Modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not using a standard graphics adapter. ● You are not using a preset mode. If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the 15 factory preset, there are 7 user modes that can be entered and stored. The only condition to store as a user mode is the new display information must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes. ENWW Recognizing Preset Display Resolutions 25