HP LH4r HP Netserver LH 3/LH 3r Power Supply Upgrade Kit - Page 12
Cover 1, Cover 3
 |
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 1 Remove two screws securing LH 3r to rack Cover 1 Introduction Remove two screws securing LH 3r to rack Do not remove three Cover 3 screws securing the hinge to the LH 3r Do not remove two screws securing the bracket to the LH 3r Figure 1-3. Screw and Cover Locations (LH 3r) 3. Slide out the NetServer until the rail locks "click" into place. 4. Loosen the thumbscrew at the front of covers 1 and 3 and pull the covers forward, using the handles on the covers, and then lift them off the chassis (see Figure 1-4). Cover 1 Cover 3 Figure 1-4. Removing the Covers (NetServer LH 3r) 8
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
Chapter 1
Introduction
8
Cover 1
Cover 3
Do not
remove three
screws securing
the hinge to the LH 3r
Remove two screws
securing LH 3r to rack
Remove two screws
securing LH 3r to rack
Do not
remove two
screws securing
the bracket to the LH 3r
Figure 1-3. Screw and Cover Locations (LH 3r)
3.
Slide out the NetServer until the rail locks "click" into place.
4.
Loosen the thumbscrew at the front of covers 1 and 3 and pull the covers
forward, using the handles on the covers, and then lift them off the chassis
(see Figure 1-4).
Cover 1
Cover 3
Figure 1-4. Removing the Covers (NetServer LH 3r)