HP LH4r HP Netserver LH 3/LH 3r Power Supply Upgrade Kit - Page 7

1 Introduction Verifying Contents The contents of the shipping box include: • Power supply module (PSM) • Power supply fan module • Filler panel for the empty bay • Power supply cage Prepare for Installation Gather the tools and the setup information you need to install the power supply module, cage, and fan module before removing them from their packaging. Tools You Need To install this accessory kit, you need the following tools: • A slotted head screwdriver, or TorxTM screwdriver. • An anti-static service kit (3MTM 8501/8502/8503 or equivalent). This kit includes a static-dissipating work surface, a chassis clip lead, and a wrist strap. Installation Overview The Power Supply Upgrade Kit installation procedure is as follows: 1. Remove the HP NetServer front bezel and covers (Chapter 1). 2. Install the cage for the redundant power supply module (Chapter 2). 3. Install the redundant power supply module (Chapter 2). 4. Install the filler panel (Chapter 2). 5. Install an additional fan module in front of the existing power supply fan module (Chapter 3). 6. Replace the HP NetServer covers (Chapter 1). 3