HP LH4r HP Netserver LT 6000r Third-Party Racks - Page 6

Chapter 1 Rack Mounting the HP NetServer • Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections that are not direct connections to the branch circuit (for example: power strips). HP Net Server Rack-Mount Parts List Make sure that the rack-mount kit that comes with your HP NetServer LT 6000r contains with the following parts. Quantity Part 2 Slides 1 Template Definition of Terms Terms used in this document are defined in the table below. Term Definition Bezel Control Panel EIA unit Cage nut Rack (rack cabinet, rack enclosure) Slide Slide mounting flange A removable plastic face panel that covers entire front of the HP NetServer. Display and buttons used to view HP NetServer status and change system parameters. Industry standard measurement (1.75 in / 44.45 mm), consisting of three vertical mounting holes in a rack column. Single nut designed to clip behind the rack column and accept a screw through the hole in the column. The equipment enclosure in which the HP NetServer will be installed. This document covers installation in thirdparty racks. Extendible side bracket (attached to the rack chassis columns) on which the HP NetServer is mounted. Mounting flange located at either end of the slide. 2