HP LH4r HP Netserver LXr 8500 Reference Guide - Page 58

Index 208 VAC, LXr 8500 configuration, 34 208/240 VAC, 10 amp extension, 18 208/240 VAC, 16 amp, 18 230/240 VAC illustration, 37, 39 configuration guidelines, 21 configurations for LXr 8500, 20 determining and balancing load on double PDUs, 33 models, illustration, 19 placement for the LXr 8500 rack, 18 position in the rack, 20 power down, 45 power off sequence, 45 power strip. See Power Distribution Unit power up minimizing current inrush, 6 power up sequence, 45 R rack assembly assemble enclosure, 9 cabling overview, 28 cabling summary, 12 configuration planning, 11 doors and side panels, 13 mount door hinge and latch first, 10 mounting units, 11 preparation, 7, 8 procedure, 11 site preparation, 7 tying two racks together, 10 unpacking the rack, 8 verify and unpack shipment, 7 rack layout, 11 rack power configurations 208 VAC PDU, 35 230/240 VAC, 38 plugs and receptacles, 16 Redimdamt Switch order of installation, 11 54 S safety anti tip foot use, 8 anti-tip features, 9 care in lifting units, 7 electrical ground connection for the rack, 6 electrical shock prevention, 6 electrostatic damage (ESD) prevention, 6 extend one unit at a time, 9 leveler feet, 8 lifting precautions, 8 moving racks safely, 8 preventing component damage, 6 rear latch removal, 10 remove power supplies and disk packs, 9 use attached rack mounting handles, 9 Safety rack cabling, 5 shipment to a second location packaging materials, 7 remove and save shipping panels, 9 side panels removal of, 10 site preparation, 2 checklist, 3 summary, 7 T turn on power, 45 U Uninterruptible Power Supply installation, 10 plug in early to charge batteries, 9 unpacking components, 9 rack enclosure, 8 UPS. See Uninteruptible Power Supply. See Uninterruptible Power Supply