Home » HP Manuals » Desktops » HP LH4r » Manual Viewer

HP LH4r HP NetServer LXr Pro8 POST and Beep Codes - Page 1

HP LH4r - NetServer - 256 MB RAM Manual

Add to My Manuals
Save this manual to your list of manuals

Contents HP NetServer LXrPro8 Error Messages HP NetServer LXrPro8 Beep Codes

Section	Page
HP NetServer LXrPro8 POST and Beep Codes	1
Contents	1
HP NetServer LXr Pro8 Error Messages	2
200 Failure Fixed Disk	2
210 Stuck Key	2
211 Keyboard Error	2
212 Keyboard Controller Failed	2
213 Keyboard locked -- unlock key switch	2
220 Monitor type does not match CMOS -- run Setup	3
230 System RAM failed at offset: xxxx	3
231 Shadow RAM failed at offset: xxxx	3
232 Extended RAM failed at offset: xxxx	3
250 System battery is dead -- replace and run Setup	3
251 System CMOS checksum is bad -- Default configuration used	3
260 System timer error	4
270 Real time clock error	4
271 Check date and time settings	4
280 Previous boot incomplete -- default configuration used.	4
281 Memory size found by POST different from EISA CMOS	5
2B0h Floppy drive A error	5
2B1h Floppy drive B error	5
2D0h System cache error -- cache disabled	5
2B2h Incorrect Drive A type -- run SETUP	6
2B3h Incorrect Drive B type -- run SETUP	6
2F0 CPU ID:xx	6
2F4 EISA CMOS not writable	6
2F5 DMA test failed	7
2F6 Software NMI failed	7
2F7 Fail-safe timer NMI failed	7

Match case Limit results 1 per page

Contents

HP NetServer LXrPro8 Error Messages

HP NetServer LXrPro8 Beep Codes