HP LH6000r HP Netserver LPr Installation Guide - Page 76
Step 4, Assemble the rails.
View all HP LH6000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 9 Mounting the Server in the Rack Step 4: Assemble the rails. To assemble the two rails: • Slide the rail pieces together. • Both rails work on either side of the rack. NOTE 68 Figure 9-8. Assembly of the Rails As you go through the following steps, finger tighten the screws holding the rails, rear stops, and the LPr chassis to the rack. Once all the parts are in place, use the T25 driver to tighten all 12 screws in a couple of passes as you apply downward pressure on the chassis to ensure it seats correctly.
Chapter 9
Mounting the Server in the Rack
68
Step 4:
Assemble the rails.
To assemble the two rails:
•
Slide the rail pieces together.
•
Both rails work on either side of the rack.
Figure 9-8. Assembly of the Rails
NOTE
As you go through the following steps, finger tighten the
screws holding the rails, rear stops, and the LPr chassis to the
rack. Once all the parts are in place, use the T25 driver to
tighten all 12 screws in a couple of passes as you apply
downward pressure on the chassis to ensure it seats correctly.